The whole experience is aimed at being a pleasant one, with this in mind cleanliness is paramount and communication a key subject. At the start of the project a plan of work is explained, allowing the customer an opportunity to raise any points that they may be concerned about. Installations are carried out by experienced engineers and other work by accredited tradesmen. On completion a full test is carried out and an explanation given on the use of the appliance.

Below are pictures of Shire Stove Installations at work.

Project 1:

The above shows the transition from an original builders opening, ventilated, chimney lined with Class 1 Flex Liner, to the building of a bespoke surround for the final installation of an original Italian pizza oven.

BACK TO TOP

Project 2:

Project 2 shows the final installation of a stove after the removal of a 1930s brick fireplace, with an air dried Oak beam & York stone hearth.

Project 3:

A fireplace designed and built by us using original reclaimed bricks and air dried Oak, specifically for the installation of a multifuel stove.

Project 4:

Project 4 shows the initial preparation and the building of an opening for the finished installation of a multifuel stove, using slate for the hearth and an air dried section of Oak as a beam and mantle.

Project 5:

Project 5 shows, again, shows the initial preparation and the building of an opening for the installation of a multifuel stove, but this time as well as using slate for the hearth we fitted a tailor made stone surround.